PTFE TRAY - DRYING (HEAVY WALL)
These trays will withstand hot air or stream sterillisation.
Useful for paper chromatography too.
LTH. x WTH. x THK.(mm): - 250 x 150 x 50 200
x 100 x 50 150 x 150 x 40 |
|
PTFE GAS WASH BOTTLE with SCREW CAP
For rinsing with or dispensing virtually all chemicals. Inert,
unbreakable and easy to clean.
Capacity: - 100ml. 250ml. 500ml. 1000ml.
|
|
PTFE DROPPING BOTTLES
CAPACITY: - 25ml. 50ml. |
|
PTFE CONICAL FLASK NAROW MOUTH
For use with and dispensing of virtually all chemicals. Unbreakable,
inert properties of PTFE facilitate ease of pouring due to non
stick, non absorbtion properties.
CAPACITY: - 25ml. 50ml. 100ml. 150ml.
200ml. 250ml. 500ml. |
|
PTFE CONICAL FLASK WIDE MOUTH
For use with and dispensing of virtually all chemicals. Unbreakable,
inert properties of PTFE facilitate ease of pouring due to non
stick, non absorbtion properties.
CAPACITY: - 25ml. 50ml. 100ml. 150ml.
200ml. 250ml. 500ml. |
|
PTFE CONICAL FLASK WITH SCREW CAP
CAPACITY: - 25ml. 50ml. 100ml. 150ml.
200ml. 250ml. 500ml. |
|
PTFE DIGESTION VESSEL
For fluid transfer at low pressure upto 5psi containers have
two ¼" fitting with tubing.
CAPACITY: - 250ml. 500ml. |
|
PTFE TUBE OR SLEEVE, THIN WALL
(IN LENGTH OF 3 TO 8 METRES)
ID. x OD. x WT.(mm.): 3.2 x 1.6 x 0.8 4.8
x 3.2 x 0.8 6.4 x 4.8 x 0.8
8.0 x 6.4 x 0.8 9.5 x 7.9 x 0.8 11.1
x 9.5 x 0.8 12.7 x 11.1 x 0.8
14.3 x 12x0.8 |
|
PTFE TUBE, HEAVY WALL
(IN LENGTH OF 3 TO 8 METRES)
OD x ID x WT (mm): 3.2 x 1.6 x 0.8 4.8
x 3.2 x 0.8 6.4 x 4.8 x 0.8 8.0
x 6.4 x 0.8
9.5 x 7.9 x 0.8 11.1 x 9.5 x 0.8 12.7
x 11.1 x 0.8 14.3x12.7x 0.8 |
|
PTFE TUBE OR SLEEVE HEAVY WALL
(IN LENGTH OF 3 TO 8 MTRS.). *marked two items in length up
to 3 mtr
OD x ID x WT (mm): 6.35 x 3.2 x 1.5 8.0
x 4.8 x 1.5 9.5 x 6.35 x 1.5 11.1x8.0x1.5
12.5 x 9.5 x 1.5 16.0 x 12.5 x 1.5 19.0
x 16.0 x 1.5 22.2 x 19.0 x 1.5
25.0 x 22.0 x 1.5* 28.0 x 25.0 x 1.5*
TOLERANCE: First 5 Items: +/- 0.3 mm. on OD, ID & Wall
THICKNESS : Last 5 items : +/- 0.5 mm.on OD, ID, & +/- 0.3
mm. On Wall Thk. |
|
PTFE REDUCTION ADAPTOR
Made for joining standard joints different sizes use in place
of glass adapters eliminate, freezing andbreaking no grease
required, easy to insert and remove.
FEMALE SOCKET X MALE CONE: B14 x B19 B19 x B24 B24 x B34 B34xB55
|
|
PTFE EXPANSION ADAPTER
Male Cone x Female Socket : B14 x B19 B19
x B24 B24 x B39 B34 x B
55 |
|
PTFE GAS INTET OR OUTLET TUBE
CONE WITH BEND) Made of PTFE
Size: B14 B19 B24 B34 B55 |
|
PTFE SCRAPER
For delicate transfer jobs or for scraping precipitates and
residues each scrap has a chisel tip on one end and diagonal
cut on the other end.
DIA. x HT. : 10 x200 12 x 250 12
x 300 |
|
PTFE RELATIVE DENSITY BOTTLE
SPECIFIC GRAVITY BOTTLE WITH INTER CHANGEABLE STOPPER.
CAPACITY: - 10ml., 25ml., 50ml. |
|
PTFE WEIGHING BOTTLE
WITH INTERCHANGEABLE STOPPER, TALL FORM AND LOW FORM.
CAPACITY: - 5ml. 15ml. 25ml.
60ml. 20ml. 40ml.
DIA. x HT.:- 20x40 25x50 30x60
40x80 50x25 60x30
|
|
« BACK
|
|